Design, synthesis, and evaluation of substituted nicotinamide adenine dinucleotide (NAD+) synthetase inhibitors as potential antitubercular agents.

Nicotinamide adenine dinucleotide (NAD+) synthetase catalyzes the last step in NAD+ biosynthesis. Depletion of NAD+ is bactericidal for both active and dormant Mycobacterium tuberculosis (Mtb). By inhibiting NAD+ synthetase (NadE) from Mtb, we expect to eliminate NAD+ production which will result in cell death in both growing and nonreplicating Mtb. NadE inhibitors have been investigated against various pathogens, but few have been tested against Mtb. Here, we report on the expansion of a series of urea-sulfonamides, previously reported by Brouillette et al. Guided by docking studies, substituents on a terminal phenyl ring were varied to understand the structure-activity-relationships of substituents on this position. Compounds were tested as inhibitors of both recombinant Mtb NadE and Mtb whole cells. While the parent compound displayed very weak inhibition against Mtb NadE (IC50=1000µM), we observed up to a 10-fold enhancement in potency after optimization. Replacement of the 3,4-dichloro group on the phenyl ring of the parent compound with 4-nitro yielded 4f, the most potent compound of the series with an IC50 value of 90µM against Mtb NadE. Our modeling results show that these urea-sulfonamides potentially bind to the intramolecular ammonia tunnel, which transports ammonia from the glutaminase domain to the active site of the enzyme. This hypothesis is supported by data showing that, even when treated with potent inhibitors, NadE catalysis is restored when treated with exogenous ammonia. Most of these compounds also inhibited Mtb cell growth with MIC values of 19-100µg/mL. These results improve our understanding of the SAR of the urea-sulfonamides, their mechanism of binding to the enzyme, and of Mtb NadE as a potential antitubercular drug target.

Structure and mechanism of benzaldehyde dehydrogenase from Pseudomonas putida ATCC 12633, a member of the Class 3 aldehyde dehydrogenase superfamily.

Benzaldehyde dehydrogenase from Pseudomonas putida (PpBADH) belongs to the Class 3 aldehyde dehydrogenase (ALDH) family. The Class 3 ALDHs are unusual in that they are generally dimeric (rather than tetrameric), relatively non-specific and utilize both NAD+ and NADP+. To date, X-ray structures of three Class 3 ALDHs have been determined, of which only two have cofactor bound, both in the NAD+ form. Here we report the crystal structure of PpBADH in complex with NADP+ and a thioacyl intermediate adduct. The overall architecture of PpBADH resembles that of most other members of the ALDH superfamily, and the cofactor binding residues are well conserved. Conversely, the pattern of cofactor binding for the rat Class 3 ALDH differs from that of PpBADH and other ALDHs. This has been interpreted in terms of a different mechanism for the rat enzyme. Comparison with the PpBADH structure, as well as multiple sequence alignments, suggest that one of two conserved glutamates, at positions 215 (209 in rat) and 337 (333 in rat), would act as the general base necessary to hydrolyze the thioacyl intermediate. While the latter is the general base in the rat Class 3 ALDH, site-specific mutagenesis indicates that Glu215 is the likely candidate for PpBADH, a result more typical of the Class 1 and 2 ALDH families. Finally, this study shows that hydride transfer is not rate limiting, lending further credence to the suggestion that PpBADH is more similar to the Class 1 and 2 ALDHs than it is to other Class 3 ALDHs.

The kinetic characterization and X-ray structure of a putative benzoylformate decarboxylase from M. smegmatis highlights the difficulties in the functional annotation of ThDP-dependent enzymes.

Benzoylformate decarboxylase (BFDC) is a thiamin diphosphate (ThDP)-dependent enzyme that catalyzes the nonoxidative decarboxylation of benzoylformate. It is the penultimate enzyme in both the mandelate pathway and the d-phenylglycine degradation pathway. The ThDP-dependent Enzyme Engineering Database (TEED) now lists more than 800 sequences annotated as BFDCs, including one from Mycobacterium smegmatis (MsBFDC). However, there is no evidence that either pathway for benzoylformate formation exists in the M. smegmatis genome. Further, sequence alignments of MsBFDC with the well characterized enzyme isolated from Pseudomonas putida (PpBFDC) indicate that there will be active site substitutions in MsBFDC likely to reduce activity with benzoylformate. Taken together these data would suggest that the annotation is unlikely to be correct. To test this hypothesis the putative MsBFDC was cloned, expressed, purified, and the X-ray structure was solved to a resolution of 2.2Å. While showing no evidence for ThDP in the active site, the structure was very similar to that of PpBFDC. A number of 2-oxo acids were tested as substrates. For MsBFDC the K(m) value for benzoylformate was ~23 mM, nearly 100-fold greater than that of PpBFDC while the k(cat) value was reduced 60-fold. These values would suggest that benzoylformate is not the physiological substrate for this enzyme, and that annotation as a 2-oxo acid decarboxylase may be more appropriate.

Characterization of a thiamin diphosphate-dependent phenylpyruvate decarboxylase from Saccharomyces cerevisiae.

The product of the ARO10 gene from Saccharomyces cerevisiae was initially identified as a thiamine diphosphate-dependent phenylpyruvate decarboxylase with a broad substrate specificity. It was suggested that the enzyme could be responsible for the catabolism of aromatic and branched-chain amino acids, as well as methionine. In the present study, we report the overexpression of the ARO10 gene product in Escherichia coli and the first detailed in vitro characterization of this enzyme. The enzyme is shown to be an efficient aromatic 2-keto acid decarboxylase, consistent with it playing a major in vivo role in phenylalanine, tryptophan and possibly also tyrosine catabolism. However, its substrate spectrum suggests that it is unlikely to play any significant role in the catabolism of the branched-chain amino acids or of methionine. A homology model was used to identify residues likely to be involved in substrate specificity. Site-directed mutagenesis on those residues confirmed previous studies indicating that mutation of single residues is unlikely to produce the immediate conversion of an aromatic into an aliphatic 2-keto acid decarboxylase. In addition, the enzyme was compared with the phenylpyruvate decarboxylase from Azospirillum brasilense and the indolepyruvate decarboxylase from Enterobacter cloacae. We show that the properties of the two phenylpyruvate decarboxylases are similar in some respects yet quite different in others, and that the properties of both are distinct from those of the indolepyruvate decarboxylase. Finally, we demonstrate that it is unlikely that replacement of a glutamic acid by leucine leads to discrimination between phenylpyruvate and indolepyruvate, although, in this case, it did lead to unexpected allosteric activation.

Active-site engineering of benzaldehyde lyase shows that a point mutation can confer both new reactivity and susceptibility to mechanism-based inhibition.

Benzaldehyde lyase (BAL) from Pseudomonas putida is a thiamin diphosphate (ThDP)-dependent enzyme that catalyzes the breakdown of (R)-benzoin. Here we report that a point mutant, BAL A28S, not only catalyzes the decarboxylation of benzoylformate but, like benzoylformate decarboxylase (BFDC), is also inactivated by the benzoylformate analogues methyl benzoylphosphonate (MBP) and benzoylphosphonate (BP). The latter has no effect on wild-type BAL, and the inactivation of the A28S variant is shown to result from phosphorylation of the newly introduced serine residue. This lends support to the proposal that an appropriately placed nucleophile facilitates the expulsion of carbon dioxide from the active site in many ThDP-dependent decarboxylases.

Snapshot of a reaction intermediate: analysis of benzoylformate decarboxylase in complex with a benzoylphosphonate inhibitor.

Benzoylformate decarboxylase (BFDC) is a thiamin diphosphate- (ThDP-) dependent enzyme acting on aromatic substrates. In addition to its metabolic role in the mandelate pathway, BFDC shows broad substrate specificity coupled with tight stereo control in the carbon-carbon bond-forming reverse reaction, making it a useful biocatalyst for the production of chiral alpha-hydroxy ketones. The reaction of methyl benzoylphosphonate (MBP), an analogue of the natural substrate benzoylformate, with BFDC results in the formation of a stable analogue (C2alpha-phosphonomandelyl-ThDP) of the covalent ThDP-substrate adduct C2alpha-mandelyl-ThDP. Formation of the stable adduct is confirmed both by formation of a circular dichroism band characteristic of the 1',4'-iminopyrimidine tautomeric form of ThDP (commonly observed when ThDP forms tetrahedral complexes with its substrates) and by high-resolution mass spectrometry of the reaction mixture. In addition, the structure of BFDC with the MBP inhibitor was solved by X-ray crystallography to a spatial resolution of 1.37 A (PDB ID 3FSJ). The electron density clearly shows formation of a tetrahedral adduct between the C2 atom of ThDP and the carbonyl carbon atom of the MBP. This adduct resembles the intermediate from the penultimate step of the carboligation reaction between benzaldehyde and acetaldehyde. The combination of real-time kinetic information via stopped-flow circular dichroism with steady-state data from equilibrium circular dichroism measurements and X-ray crystallography reveals details of the first step of the reaction catalyzed by BFDC. The MBP-ThDP adduct on BFDC is compared to the recently solved structure of the same adduct on benzaldehyde lyase, another ThDP-dependent enzyme capable of catalyzing aldehyde condensation with high stereospecificity.

Detection and time course of formation of major thiamin diphosphate-bound covalent intermediates derived from a chromophoric substrate analogue on benzoylformate decarboxylase.

The mechanism of the enzyme benzoylformate decarboxylase (BFDC), which carries out a typical thiamin diphosphate (ThDP)-dependent nonoxidative decarboxylation reaction, was studied with the chromophoric alternate substrate (E)-2-oxo-4(pyridin-3-yl)-3-butenoic acid (3-PKB). Addition of 3-PKB resulted in the appearance of two transient intermediates formed consecutively, the first one to be formed a predecarboxylation ThDP-bound intermediate with lambda(max) at 477 nm, and the second one corresponding to the first postdecarboxylation intermediate the enamine with lambda(max) at 437 nm. The time course of formation/depletion of the PKB-ThDP covalent complex and of the enamine showed that decarboxylation was slower than formation of the PKB-ThDP covalent adduct. When the product of decarboxylation 3-(pyridin-3-yl)acrylaldehyde (PAA) was added to BFDC, again an absorbance with lambda(max) at 473 nm was formed, corresponding to the tetrahedral adduct of PAA with ThDP. Addition of well-formed crystals of BFDC to a solution of PAA resulted in a high resolution (1.34 A) structure of the BFDC-bound adduct of ThDP with PAA confirming the tetrahedral nature at the C2alpha atom, rather than of the enamine, and supporting the assignment of the lambda(max) at 473 nm to the PAA-ThDP adduct. The structure of the PAA-ThDP covalent complex is the first example of a product-ThDP adduct on BFDC. Similar studies with 3-PKB indicated that decarboxylation had taken place. Evidence was also obtained for the slow formation of the enamine intermediate when BFDC was incubated with benzaldehyde, the product of the decarboxylation reaction thus confirming its presence on the reaction pathway.

Characterization of benzaldehyde lyase from Pseudomonas fluorescens: A versatile enzyme for asymmetric C-C bond formation.

The thiamin-diphosphate-dependent enzyme benzaldehyde lyase is a very import catalyst for chemoenzymatic synthesis catalyzing the formation and cleavage of (R)-hydroxy ketones. We have studied the stability of the recombinant enzyme and some enzyme variants with respect to pH, temperature, buffer salt, cofactors and organic cosolvents. Stability of BAL in chemoenzymatic synthesis requires the addition of cofactors to the buffer. Reaction temperature should not exceed 37 degrees C. The enzyme is stable between pH 6 and 8, with pH 8 being the pH-optimum of both the lyase and the ligase reaction. Potassium phosphate and Tris were identified as optimal reaction buffers and the addition of 20 vol% DMSO is useful to enhance both the solubility of aromatic substrates and products and the stability of BAL. The initial broad product range of BAL-catalyzed reactions has been enlarged to include highly substituted hydroxybutyrophenones and aliphatic acyloins.

Exploring the active site of benzaldehyde lyase by modeling and mutagenesis.

Benzaldehyde lyase (BAL) is a thiamin diphosphate-dependent enzyme, which catalyzes the breakdown of (R)-benzoin to benzaldehyde. In essence, this is the reverse of the carboligation reaction catalyzed by benzoylformate decarboxylase (BFD). Here, we describe the first steps towards understanding the factors influencing BFD to form a CC bond under conditions wherein BAL will cleave the same bond. What are the similarities and differences between these two enzymes that result in the different catalytic activities? The X-ray structures of BFD and pyruvate decarboxylase (PDC) were used as templates for modeling benzaldehyde lyase. The model shows that a glutamine residue, Gln113, replaces the active site histidines of BFD and PDC. Replacement of the Gln113 by alanine or histidine reduced the value of k(cat) for lyase activity by more than 200-fold. The residues in BFD interacting with the phenyl ring of benzoylformate have similarly positioned counterparts in BAL but Ser26, the residue known to interact with the carboxylate group of benzoylformate, has been replaced by an alanine (Ala28). The BAL A28S variant exhibited 7% of WT activity in the BAL assay but, in the most intriguing result, this variant was able to catalyze the decarboxylation of benzoylformate. Conversely, the BFD S26A variant was unable to cleave benzoin.

Exchanging the substrate specificities of pyruvate decarboxylase from Zymomonas mobilis and benzoylformate decarboxylase from Pseudomonas putida.

Pyruvate decarboxylase from Zymomonas mobilis (PDC) and benzoylformate decarboxylase from Pseudomonas putida (BFD) are thiamine diphosphate-dependent enzymes that decarboxylate 2-keto acids. Although they share a common homotetrameric structure they have relatively low sequence similarity and different substrate spectra. PDC prefers short aliphatic substrates whereas BFD favours aromatic 2-keto acids. These preferences are also reflected in their carboligation reactions. PDC catalyses the conversion of benzaldehyde and acetaldehyde to (R)-phenylacetylcarbinol and predominantly (S)-acetoin, whereas (R)-benzoin and mainly (S)-2-hydroxypropiophenone are the products of BFD catalysis. Comparison of the X-ray structures of both enzymes identified two residues in each that were likely to be involved in determining substrate specificity. Site-directed mutagenesis was used to interchange these residues in both BFD and PDC. The substrate range and kinetic parameters for the decarboxylation reaction were studied for each variant. The most successful variants, PDCI472A and BFDA460I, catalysed the decarboxylation of benzoylformate and pyruvate, respectively, although both variants now preferred the long-chain aliphatic substrates, 2-ketopentanoic and 2-ketohexanoic acid. With respect to the carboligase activity, PDCI472A proved to be a real chimera between PDC and BFD whereas BFDA460I/F464I provided the most interesting result with an almost complete reversal of the stereochemistry of its 2-hydroxypropiophenone product.

Mandelamide hydrolase from Pseudomonas putida: characterization of a new member of the amidase signature family.

A recently discovered enzyme in the mandelate pathway of Pseudomonas putida, mandelamide hydrolase (MAH), catalyzes the hydrolysis of mandelamide to mandelic acid and ammonia. Sequence analysis suggests that MAH is a member of the amidase signature family, which is widespread in nature and contains a novel Ser-cis-Ser-Lys catalytic triad. Here we report the expression in Escherichia coli, purification, and characterization of both wild-type and His(6)-tagged MAH. The recombinant enzyme was stable, exhibited a pH optimum of 7.8, and was able to hydrolyze both enantiomers of mandelamide with little enantiospecificity. The His-tagged variant showed no significant change in kinetic constants. Phenylacetamide was found to be the best substrate, with changes in chain length or replacement of the phenyl group producing greatly decreased values of k(cat)/K(m). As with another member of this family, fatty acid amide hydrolase, MAH has the uncommon ability to hydrolyze esters and amides at similar rates. MAH is even more unusual in that it will only hydrolyze esters and amides with little steric bulk. Ethyl and larger esters and N-ethyl and larger amides are not substrates, suggesting that the MAH active site is very sterically hindered. Mutation of each residue in the putative catalytic triad to alanine resulted in total loss of activity for S204A and K100A, while S180A exhibited a 1500-fold decrease in k(cat) and significant increases in K(m) values. Overall, the MAH data are similar to those of fatty acid amide hydrolase and support the suggestion that there are two distinct subgroups within the amidase signature family.

Identification and characterization of a mandelamide hydrolase and an NAD(P)+-dependent benzaldehyde dehydrogenase from Pseudomonas putida ATCC 12633.

The enzymes of the mandelate metabolic pathway permit Pseudomonas putida ATCC 12633 to utilize either or both enantiomers of mandelate as the sole carbon source. The genes encoding the mandelate pathway were found to lie on a single 10.5-kb restriction fragment. Part of that fragment was shown to contain the genes coding for mandelate racemase, mandelate dehydrogenase, and benzoylformate decarboxylase arranged in an operon. Here we report the sequencing of the remainder of the restriction fragment, which revealed three further open reading frames, denoted mdlX, mdlY, and mdlD. All were transcribed in the opposite direction from the genes of the mdlABC operon. Sequence alignments suggested that the open reading frames encoded a regulatory protein (mdlX), a member of the amidase signature family (mdlY), and an NAD(P)(+)-dependent dehydrogenase (mdlD). The mdlY and mdlD genes were isolated and expressed in Escherichia coli, and the purified gene products were characterized as a mandelamide hydrolase and an NAD(P)(+)-dependent benzaldehyde dehydrogenase, respectively.